Using A Rotary

To generate and output data for rotary processing, you have to enable and set up rotary first. For the instructions on the machine side, refer to the laser’s manual for more information.

In the tab User of System Work Plat, click Read to read settings from the laser machine.

Rotary Settings

In the section Rotating of the page Other, set Enable rotating to Yes, set Circle pulse to 10000 (51200 or 25600 if you have an old model), and set Diameter according to the current workpiece. Click Write to update settings in the machine.

If it is the first time you work with a rotary, click Test to do a whole round test to check whether the Circle pulse is correct.

Now, the software is ready for rotary processing. Just follow the workflow of the normal processing and the software will take care of the rest.

Leave a Reply

Your email address will not be published. Required fields are marked *