Table of Contents
Introduction
Safety
Installation
- Connect the Automatic Feeder
- Connecting the Assist Gas
- Filling up the Chiller
- Connecting Electrical Power
Welding Gun
- Connecting the Fiber
- Connecting the Assist Gas and the Cooling Water
- Lens Components
- Switch the Handheld Gun to the Cleaning Mode
Basics
- Turn on the Machine
- Turn off the Machine
- Control System User Interface
- Function Tests
- Switch the Control System to the Cleaning Mode
Welding
Cleaning
Maintenance
- Cleaning and Replacing the Nozzle
- Clean and Replace the Protecting Lens
- Clean and Replace the Focus Lens
- Replacing the Cooling Water
- Cleaning the Dustproof Filter of the Chiller
Frequently Asked Questions
If any details in this manual is unclear or if you need additional assistance setting up your machine, please feel free to call us at +1 (626) 671-4014 or email at service@gueagle.com.