Turn on the Machine

  1. Connect electrical power.

  2. Turn on the protecting switch on the backside of the machine.

    Turn on the Protecting Switch

  3. Release the emergency button.

    Turn on

  4. Turn on the main switch.

  5. Turn on the chiller.


    The laser can NOT work if the water temperature is below 68 F (20 C). Please turn on the machine in advance to warm up if ambient temperature is low.

  6. Turn on the laser.

  7. Turn on the automatic feeder.

    Turn on the Automatic Feeder

  8. Open the assist gas.

    Open the Gas

Leave a Reply

Your email address will not be published. Required fields are marked *