Cleaning
Please follow the steps below to do cleaning.
-
Switch the machine to the cleaning mode.
Refer to Switch the Control System to the Cleaning Mode for more information. -
Turn on the machine.
Refer to Turn on the Machine for more information. -
Prepare the workpiece.
-
Set cleaning parameters.
-
Set the machine to the READY state.
Click on the Cleaning button to set the machine to the READY state. -
Put on the protecting glasses.
WARNING
The protecting glasses MUST be worn properly to avoid eyes hurting.
-
Aim the handheld gun to the workpiece.
-
Press and hold the trigger, adjust the distance between the handheld gun and the workpiece to get the most powerful cleaning effect, and then swing the handheld gun smoothly along the workpiece to do cleaning.
-
Release the trigger to stop cleaning.
-
Set the machine to the IDLE state.
Click on the Cleaning button to set the machine to the IDLE state.
bonjour .et il possible de décaper peinture sur bois averc cette machine ?; merci a vous mr lupano
Bonjour, M. Lupano, cette machine ne peut pas faire cela car vous pourriez déclencher un incendie. -Mando