Table of Contents
Introduction
Safety
Installation
- Get to Know the Components of the Laser System
- Get Prepared for the Installation
- Unpacking the Laser System
- Set up the Machine
- (For 3kW Only) Set up the Control Console
- (For 6kW Only) Set up the Control Console
- (For 6kW Only) Install the Fiber Laser
- Connecting the Chiller
- Connecting the Exhaust(s)
- Connecting the Voltage Regulator
- Connecting the Transformer
- Connecting the Assist Gas
Getting Started
Parts in CypCut
Technology in CypCut
- Hints for Setting Technology
- Cutting Parameters
- Lead-Ins and Lead-Outs
- Kerf Compensation
- Microjoints
- Technologies for Getting Good Corners
- Automatically Applied Technologies When Nesting
- Auxiliary Technologies
- Check Technology
Appendices
If any details in this manual is unclear or if you need additional assistance setting up your machine, please feel free to call us at +1 (626) 671-4014 or email at service@gueagle.com.