This guide will show you how to unpack your new laser machine, install the laser tube(s) and other parts, install the software, and create your first sample. Table of Contents Unpacking Your machine has been carefully packed and shipped in…
Cutting and engraving could be two times efficient on dual heads laser machines, by driving two heads working on same patterns at the same time. But sometimes, you just want to cut or engrave a big design which could not…
The X-1309, or similar model which has a closed cabin, will shutdown laser and stop cutting or engraving if you open the front door or the cover of the laser tube housing box, to keep you from hurting by laser…
Before cutting printed, painted or embroidered designs on materials with camera tracing system, you need to prepare materials with additional mark points, along with original designs. Table of Contents Get Familiar with Mark Point Types There’re several mark point types…
RDCAM is a high performance control system embedded in laser machines, EAGLECAM is a customized version of RDCAM which support our premium EaglePrint print driver software. The control card has a configuration profile stored in it according to the laser…
Up to 19% Off
Flat shipping rate all over the mainland U.S.
$100/pc for 100W, $150/pc for 130W/150W
CO2 Laser Tube
Up to 19% Off
Flat shipping rate all over the mainland U.S.
$100/pc for 100W, $150/pc for 130W/150W
