This guide will show you how to unpack your new laser machine, install the laser tube(s) and other parts, install the software, and create your first sample. Table of Contents Unpacking Your machine has been carefully packed and shipped in…
Cutting and engraving could be two times efficient on dual heads laser machines, by driving two heads working on same patterns at the same time. But sometimes, you just want to cut or engrave a big design which could not…
The X-1309, or similar model which has a closed cabin, will shutdown laser and stop cutting or engraving if you open the front door or the cover of the laser tube housing box, to keep you from hurting by laser…
There should be something wrong with the USB communication if you get a “Communication Error” or “No Connected Device” error message in EagleWorks, and the laser machine is connected with computer by USB cable. Please follow steps below to diagnose…
Sometimes you get an unclear result when engraving in fast speed, especially by a machine with glass CO2 laser tube, or a machine with servo motor. On a machine equipped with glass CO2 laser tube, this is because the response…
Laser head would go back to programmed job origin by default on EAGLECAM / RDCAM powered laser machines. Sometimes, that would be a little boring, especially when the job origin is set on bottom left or bottom right of the…
RDCAM is a high performance control system embedded in laser machines, EAGLECAM is a customized version of RDCAM which support our premium EaglePrint print driver software. The control card has a configuration profile stored in it according to the laser…
Homing progress is critically important for laser machines to set up a correct coordinate system of working area for later operations, like jogging, cutting, engraving, everything related to laser head moving. Table of Contents Recap Correct Homing Progress Before diving…
Up to 19% Off
Flat shipping rate all over the mainland U.S.
$100/pc for 100W, $150/pc for 130W/150W
CO2 Laser Tube
Up to 19% Off
Flat shipping rate all over the mainland U.S.
$100/pc for 100W, $150/pc for 130W/150W
