X-1309 CO2 Laser Cutting Machine



Select options



Wishlist icon Add to wishlistAdd to wishlist

Deal of the Day!

CO2 Laser Tube

Up to 19% Off

Flat shipping rate all over the mainland U.S.
$100/pc for 100W, $150/pc for 130W/150W


The X-1309 CO2 laser cutting machine, with 51″ x 35″ (1300 x 900mm) working area, features a powered up and down working table with 8″ (200mm) adjustable space, offers an economical solution for general purpose, high quality cutting and engraving of acrylics, cardboard, wood, textiles, two-color sign laminate, stone, and much more. Our laser machines are the most robust, accurate, and reliable on the market.

Visit General Purpose Laser Cutting Machines for more information.

Which laser configuration is best for me?
You should choose single laser configuration if your primary needs is processing work pieces larger than half of the working table.

Dual laser systems include two laser heads, allowing you to cut or engrave twice as much material in the same amount of time. Each laser has an independent set of laser source, optics and power supply which you can enable or disable according to processing needs. The spacing between the heads can be adjusted at any time using just a screwdriver.

130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness). While 100W CO2 laser is better choice for precise engraving and cutting a little thin material (can cut acrylic up to 3/4" in thickness).
What about motor options?
With servo motors from world’s leading supplier, the laser head of the X-1309 can move very fast at extremely high resolution. A step size of just 6.25μm gives the machine a resolution of over 4000DPI. In arbitrary-direction cutting, the head can accelerate at 2 m/s2 (0.2G), while for X-axis scanning during engraving, acceleration up to 20 m/s2 (2G) is possible. The X-1309 with high quality stepper motors sacrifices only a small amount of performance.
The Most Profitable, Multi-Purpose Working Areas
100% Compatible with LightBurn Software
Full Pass-Through Capability
Rotary Unit*
Front Panel Display and Controls
Network Your Laser
Print Driver Included
A Complete Set of Accessories Included
Robust, High-precision Slides
Superior Mirrors and Mirror Mounts
Note: All features marked with * depend on configurations of the laser machine.
Technical Specifications
Working Area
51″ x 35″ (1300 x 900mm)
Can fit uncut sheets or long work pieces (along Y direction) with full pass-through capability.
Max. Workpiece Height
8″ (200mm) by motorized Z axis, can accommodate abnormally shaped work pieces or an optional rotary unit for use with pipe and rod stock.
Working Table*
An aluminum strip table for hard and flammable materials (acrylic, cardboard, wood, etc.), and a full-support honeycomb table suitable for soft material processing (paper and textiles).
Laser Source
CO2 Sealed Glass Laser Tube
Laser Power*
100W / 130W / 150W
Laser Configuration*
Single / Dual laser(s)
Focus Lens*
Standard 2.5″ (63.5mm), optional 4″ (101.6mm), or 2″ (50.8mm, can be equipped with a special laser pen).
EagleWorks CAD/CAM and EaglePrint print driver, compatible with Windows 7/8/10. 100% support LightBurn software.
Machine/PC Connection
Operating Mode
Cutting / Engraving / Combined
Control Interface
True Color TFT LCD panel with function buttons.
Memory Capacity
Multiple job storage up to 128M.
Up to 4064 DPI.
Motion System*
Transmission with belt on advanced balanced bearing rails.
Driven by stepper / servo motors.
Air assist pump, industrial chiller and exhaust blower included.
Electrical Requirement*
220V/50Hz, single phase, up to 2.5kW~4.5kW depends on configurations.
75″ x 67″ x 43″ (1900 x 1700 x 1100mm)
Net Weight
880lb (400Kg)
Note: All specifications marked with * depend on configurations of the laser machine.
Material Compatibility
Coated Metals
EagleWorks CAD/CAM Software

Bundled CAD/CAM software coming with the customized RDCAM control system. A complete software solution for creating, editing, optimizing, and processing patterns for laser cutting and engraving.

EaglePrint Software

A print driver software which help you using the X-1309 as a printer. You can draw anything in the software you like or are familiar with, such as CorelDRAW, Adobe Illustrator and Photoshop, even Microsoft Word, then "print" to the X-1309 for processing.

LightBurn Software

Our X-1309 is 100% compatible with LightBurn software. LightBurn is layout, editing, and control software for the laser, a native application written for Windows, Mac OS, and Linux, and talks directly to the laser, without the use of additional software.

Laser System Manual

A complete reference book for X-1309.

EagleWorks User Manual

A complete reference book for EagleWorks CAD/CAM software.

EaglePrint User Manual

A complete reference book for EaglePrint software.


There are no reviews yet.

Be the first to review “X-1309 CO2 LASER CUTTING MACHINE”

Your email address will not be published.

You may also like…