Knowledge Base
Everything you need to get started with the machines and the systems from G.U. Eagle Laser.
Laser Machine/System Manuals
EV-30 Owner's Manual
A complete reference book for the EV-30 industrial laser cutting machine.
EF-Hybrid Owner's Manual
A complete reference book for the EF-Hybrid multi-function laser welding machine.
Popular Documents
Failed to Communicate with the Laser Machine in RDCMarkVision
There should be something wrong with the USB or Ethernet connection, or a configuration error of the software, if you got an error when communicating
How to Contact Technical Service Efficiently
People are used to contact us for technical support immediately when they get in trouble with laser machines. We understand that certainly, but sometimes, slow
Speedy Engraving Is Not Clear
Sometimes you get an unclear result when engraving in fast speed, especially by a machine with glass CO2 laser tube, or a machine with servo
Programming EAGLECAM or RDCAM Control Card
RDCAM is a high performance control system embedded in laser machines, EAGLECAM is a customized version of RDCAM which support our premium EaglePrint print driver
Frequently Asked Questions
Frequently Asked Questions There’s no laser coming out while pressing the trigger Check whether the chiller and the laser are turned on. Check whether the
Latest Documents
Technology in CypCut
Technology in CypCut As soon as the parts are ready, you can set and then check technology, get the parts ready for machining. Hints for
Parts in CypCut
Parts in CypCut In this chapter, you will learn how to import or construct parts, how to use the part library, and how to nest
Getting Started
Getting Started Turn on the Laser System Turn off the Laser System Handheld Remote CypCut Basics
Installation
Installation Follow the steps below to set up your EV-30 laser system, and to be ready to get started. Get to Know the Components of
Appendices
Appendices Appendix A – (For 6kW Only) Install the Fiber Laser